NEWS
What is the function of the 6 m scissor lift?
Release time:
2022-09-05
Author:
Number of views:
The scissor structure of the 6 m scissor lift is mainly made of rectangular steel pipe. Its scissor mechanical structure makes the lifting platform have high stability, wide working platform and high bearing capacity, so that the high-altitude operation range is larger, suitable for multiple people to work at the same time. The lifting power of the platform is manual or electric, electric and manual or remote control, and it can still be used when the power is off. This product has the characteristics of flexible movement, stable lifting, convenient operation and large carrying capacity. The lifting power supply is divided into 220V or 380V power supply (batteries and diesel engines can also be used as lifting power supply). Use Italian and domestic hydraulic pump stations. The table is made of non-slip insulated plastic gusset plate, which is convenient to replace and beautiful as a whole.
Applicable places of 6 m scissor lift: installation, maintenance and cleaning of high-altitude equipment such as construction site, workshop, warehouse, grain depot, station, hotel, airport, wharf, gas station, stadium, electric power, overhead pipeline, etc., as well as lifting equipment maintenance, on-site power facilities maintenance, steel structure plant maintenance, etc.; high-altitude operation is a good helper for you.
6 m scissors function:
1. The main structure of the 6-meter scissor lift adopts high-strength manganese steel rectangular tube, which is strong and durable.
2. Set the lifting platform overload hydraulic safety protection system,
3. Composed of base, boom and workbench. The base adopts channel steel welding; the boom is scissor type cross chain vertical lifting.
4. It is equipped with anti-fall safety protection system to prevent the pipeline from bursting.
5. There is a manual control descent valve for power failure emergency descent.
6, the use of fine grinding hydraulic cylinder and imported seals, to ensure good sealing performance of the cylinder.
7, 6 meters scissor lift guardrail height between 900mm-1200mm. The customer can choose the height of the guardrail according to the requirements.
8. Equipped with manual hydraulic device, it can work normally in places with power failure or no power supply
9. When the length of the platform is insufficient, the telescopic platform can be extended to the required position to improve work efficiency.
10. Solid tires and pneumatic tires can be selected according to the place of use.
Tips for the use and maintenance of 6 m scissor lift:
1. When the equipment is used for about 2 months (according to the actual frequency of use), the rotating part should be filled with grease once;
2. Regularly check the working status of the pin every month. If the pins and screws are loose, they must be tightened to prevent the pins and screws from falling out and causing accidents.
The hydraulic oil should be kept clean and replaced every 6 months;
4, hydraulic lift maintenance, cleaning, must support good safety support.
In the process of use, we can reflect the state of the rail-type freight elevator in many details. Therefore, when using the equipment, you should always pay attention to the status of each component, and regularly maintain and inspect the equipment. Only by using the equipment carefully can we effectively extend the service life of the equipment and bring us greater efficiency.
There are two oil holes on the inclined shaft and swash plate axial piston pump of the lifting platform for oil discharge and cooling. The method used is as follows:
1. The height of the connecting pipe of No.1 oil drain hole before use, the leaked oil can flow back to the oil tank smoothly. For the hydraulic manual servo variable structure of the hydraulic pump, the shell should not exceed 0.15Mpa, otherwise it may affect the flexibility of the servo mechanism, so attention must be paid;
2. The second oil drain port is connected to the pipeline, and the cooling oil of the pipeline is lowered and flows back to the oil tank; the exhaust hole is set at the very high point of the closed circuit pipeline to eliminate the oil and gas in the air and prevent vibration and noise. The inner curve hydraulic motor is usually a fine adjustment screw. Its function is to use oil for distribution under good conditions, and try to avoid uneven forward and backward speeds and rail impacts.
6 m scissors
undefined
