NEWS
6 m scissor lift operating procedures are what?
Release time:
2022-08-23
Author:
Number of views:
The 6-meter scissor lift is used for special hydraulic lifting of cargo transportation between floors of buildings. The products are mainly transported up and down between the working floors; the car lifting between the three-dimensional garage and the underground garage floor, etc. The hydraulic system of the 6 m scissor lift is equipped with anti-fall and overload protection devices. Each floor and workbench can be set with operation buttons to achieve multi-point control. The product structure is firm, the bearing capacity is large, the lifting is stable, and the elevator installation and maintenance are simple and convenient. Replacing the lift between the lower floors is an economical and practical ideal cargo conveying equipment. According to the installation environment and use requirements of the 6 m scissor lift table, different optional configurations can be selected to achieve better use results.
It can walk quickly and slowly at different heights, and can continuously complete up and down, forward, backward, and steering on a convenient operating platform in the air. Using structural steel, laser welding electronic manipulator single-sided welding double-sided forming process, Italy imported hydraulic pump station or Anshan joint venture hydraulic pump station, aerospace cartridge valve technology, the platform is equipped with liquid level alarm, balance valve, automatic protection plate and other alarm devices. The platform is reliable and durable, with a working height of 12 meters and a load of 300kg. The fence can be extended horizontally, which greatly expands the scope of operation. The whole machine is guaranteed for one year, and the five-year warranty for key components is suitable for customers who need high-altitude operations such as factory workshops, square lobbies, airports, and parks.
It integrates four-wheel movement and two-wheel traction. The platform chassis adopts the chassis of automobile, tricycle or battery car, and the power adopts automobile engine or DC power supply, which can drive the platform up and down. Widely used in urban construction, oil fields, transportation, municipal, factory and other industries of high-altitude operations.
It uses external power supply as traction, three-phase power supply or diesel engine as power. Easy and quick to move. It is suitable for long-distance operation, mainly used for field high-altitude operation in petroleum, electric power, urban construction, post and telecommunications industries.
6 m scissor lift operating procedures:
Only trained and qualified personnel can operate the elevator.
2. The elevator operator must fasten the safety belt.
3. Before the lift is put into use, the chassis must be leveled with legs and the feet must be firmly secured.
4. The operator should pay attention to the operation sequence specified in the operation manual.
5, the workbench in the lifting process should be stable and flexible, no sudden jump or jam phenomenon. If the above phenomenon, should immediately stop the workbench inspection, eliminate the rear can work.
6, the hydraulic system in one of the following situations, should immediately stop inspection, and take measures to eliminate:
a) Abnormal noise;
B) The oil temperature rises rapidly;
c) Abnormal cylinder pressure and return oil pressure;
d) Oil leakage in the oil circuit;
e) When the "up" or "down" button is pressed, or the "up" or "down" manual valve is pressed, the workbench will not operate.
7. After pressing the "up" or "down" button, if the workbench does not move, in addition to checking the hydraulic system, check whether the lifting mechanism is stuck and whether the electrical part is damaged or overloaded.
8. There should be clearance above the workbench.
9. During the lifting process of the workbench, before turning on or off the power, the operator should pay attention to making all controllers in the zero position.
10. When operating at high altitude, the operator shall not operate the elevator at will.
11. During the lifting process of the workbench, any part of the passenger's body on the workbench shall not exceed the boundary of the workbench.
12. When the operator leaves the elevator, he needs to cut off the lifting power supply.
6 m scissors
Previous Page
Previous Page
undefined
