NEWS
6 m scissors operation specification?
Release time:
2022-12-22
Author:
Number of views:
Now there are many people6m scissorsSome of the basic information is not understood, so as manufacturers, we are also necessary to briefly explain, in fact, this6m scissorsIt is very widely used in the industrial field. Its structure is unique, its external pressure resistance is high, and its impact resistance is strong. Then when we need it, it is necessary to understand its operating specifications first. In this way, there will be no problems in the use process.
Only trained and qualified personnel can operate6m scissorstype elevator. The operator on the lift must wear a seat belt.6m scissorsBefore the lift is put into operation, it is necessary to level the chassis with legs and pad the legs firmly. The operator must concentrate and follow the operating sequence specified in the instruction manual. During the lifting process, the working platform shall be stable and flexible, and shall not jump or jam suddenly. If the above phenomenon occurs, immediately stop the machine for inspection and try to eliminate it before working.6m scissorstype elevatorofIf the hydraulic system has one of the following conditions, it should be stopped immediately for inspection and measures should be taken to eliminate: abnormal noise; rapid increase in oil temperature; abnormal cylinder pressure and oil return pressure; oil leakage in the oil circuit; press“On”or“Lower”button, or press“On”or“Lower”After the manual valve, the workbench does not move. Press“Rising”or“Descent”After the button, if the workbench does not move, in addition to checking the hydraulic system, check whether the lifting mechanism is stuck, whether the electrical part is disconnected, or whether it is overloaded.There should be a safety clearance above the workbench. Before turning on the power or when cutting off the power during the lifting of the workbench, the operator must pay attention to keeping all controllers at the zero position.
6m scissorsType lift operators shall not operate the lift at will when working at high altitude. During the lifting of the workbench, any part of the body of the person on the workbench shall not exceed the limits of the workbench. When the operator leaves the elevator, the lifting power must be cut off.
6m scissorsType elevator is a shear fork type lifting mechanism with rectangular steel pipe or steel plate as a shear fork type bracket. The opening and closing of the scissor bracket is driven by the expansion and contraction of a hydraulic cylinder or a rigid chain and a large screw transmission system. In order to realize the mechanical equipment of lifting movement, the lifting of the scissor lift structure principle is driven by the support transmission system to move smoothly, with high safety and wide application.
The above article content is for all friends to introduce the relevant6m scissorsThe key points to understand the lift. Friends can read it carefully. Of course and6m scissorsThere is still a lot of information about the lift. We will continue to update later. There are still do not understand the place can come to consult at any time.
6 m scissors
Previous Page
Previous Page
undefined
